Basic Options

SDKs are configurable using a variety of options. The options are largely standardized among SDKs, but there are some differences to better accommodate platform peculiarities. Options are set when the SDK is first initialized.

Options are passed to the SentryFlutter.init method:

import 'package:flutter/widgets.dart';
import 'package:sentry_flutter/sentry_flutter.dart';

Future<void> main() async {
  await SentryFlutter.init(
    (options) => options
      ..dsn = 'https://examplePublicKey@o0.ingest.sentry.io/0'
      ..release = 'my-project-name@2.3.12'
      ..environment = 'staging',
    appRunner: () => runApp(MyApp()),
  );
}

Common Options

The list of common options across SDKs. These work more or less the same in all SDKs, but some subtle differences will exist to better support the platform. Options that can be read from an environment variable (SENTRY_DSN, SENTRY_ENVIRONMENT, SENTRY_RELEASE) are read automatically.

dsn

The DSN tells the SDK where to send the events. If this value is not provided, the SDK will try to read it from the SENTRY_DSN environment variable. If that variable also does not exist, the SDK will just not send any events.

In runtimes without a process environment (such as the browser) that fallback does not apply.

Learn more about DSN utilization.

debug

Turns debug mode on or off. If debug is enabled SDK will attempt to print out useful debugging information if something goes wrong with sending the event. The default is always false. It's generally not recommended to turn it on in production, though turning debug mode on will not cause any safety concerns.

diagnosticLevel

Enabling debug mode makes the SDK generate as much diagnostic data as possible. However, if you'd prefer to lower the verbosity of the Sentry SDK diagnostics logs, configure this option to set the appropriate level:

• debug: default The most verbose mode
• info: Informational messages
• warning: Warning that something might not be right
• error: Only SDK internal errors are printed
• fatal: Only critical errors are printed

dist

Sets the distribution of the application. Distributions are used to disambiguate build or deployment variants of the same release of an application. For example, the dist can be the build number of an Xcode build or the version code of an Android build. The dist has a max length of 64 characters.

release

Sets the release. Some SDKs will try to automatically configure a release out of the box but it's a better idea to manually set it to guarantee that the release is in sync with your deploy integrations or source map uploads. Release names are strings, but some formats are detected by Sentry and might be rendered differently. Learn more about how to send release data so Sentry can tell you about regressions between releases and identify the potential source in the releases documentation or the sandbox.

By default the SDK will try to read this value from the SENTRY_RELEASE environment variable (in the browser SDK, this will be read off of the window.SENTRY_RELEASE.id if available).

environment

Sets the environment. This string is freeform and not set by default. A release can be associated with more than one environment to separate them in the UI (think staging vs prod or similar).

By default the SDK will try to read this value from the SENTRY_ENVIRONMENT environment variable (except for the browser SDK where this is not applicable).

sampleRate

Configures the sample rate for error events, in the range of 0.0 to 1.0. The default is 1.0, which means that 100% of error events will be sent. If set to 0.1, only 10% of error events will be sent. Events are picked randomly.

maxBreadcrumbs

This variable controls the total amount of breadcrumbs that should be captured. This defaults to 100, but you can set this to any number. However, you should be aware that Sentry has a maximum payload size and any events exceeding that payload size will be dropped.

maxCacheItems

The maximum number of envelopes to keep in cache. The SDKs use envelopes to send data, such as events, attachments, user feedback, and sessions to sentry.io. An envelope can contain multiple items, such as an event with a session and two attachments. Depending on the usage of the SDK, the size of an envelope can differ. If the number of envelopes in the local cache exceeds max-cache-items, the SDK deletes the oldest envelope and migrates the sessions to the next envelope to maintain the integrity of your release health stats. The default is 30.

attachStacktrace

When enabled, stack traces are automatically attached to all messages logged. Stack traces are always attached to exceptions; however, when this option is set, stack traces are also sent with messages. This option, for instance, means that stack traces appear next to all log messages.

This option is turned off by default.

Grouping in Sentry is different for events with stack traces and without. As a result, you will get new groups as you enable or disable this flag for certain events.

sendDefaultPii

If this flag is enabled, certain personally identifiable information (PII) is added by active integrations. By default, no such data is sent.

This option is turned off by default.

If you enable this option, be sure to manually remove what you don't want to send using our features for managing Sensitive Data.

serverName

This option can be used to supply a "server name." When provided, the name of the server is sent along and persisted in the event. For many integrations, the server name actually corresponds to the device hostname, even in situations where the machine is not actually a server.

Most SDKs will attempt to auto-discover this value.

autoSessionTracking

When set to true, the SDK will send session events to Sentry. This is supported in all browser SDKs, emitting one session per pageload and page navigation to Sentry. In mobile SDKs, when the app goes to the background for longer than 30 seconds, sessions are ended.

considerInAppFramesByDefault

Configures whether stack trace frames are considered as in app frames by default. You can use this to essentially make inAppIncludes or inAppExcludes an allow or deny list. This value is used only if Sentry can not find the origin of the frame.

• If considerInAppFramesByDefault is set to true, you only need to maintain inAppExcludes.
• Conversely, if considerInAppFramesByDefault is set to false, you only need to maintain inAppIncludes.

inAppInclude

A list of string prefixes of module names that belong to the app. This option takes precedence over in-app-exclude.

Sentry differentiates stack frames that are directly related to your application ("in application") from stack frames that come from other packages such as the standard library, frameworks, or other dependencies. The application package is automatically marked as inApp. The difference is visible in sentry.io, where only the "in application" frames are displayed by default.

inAppExclude

A list of string prefixes of module names that do not belong to the app, but rather to third-party packages. Modules considered not part of the app will be hidden from stack traces by default.

This option can be overridden using inAppInclude.

attachScreenshot

Takes a screenshot of the application when an error happens and includes it as an attachment. Learn more about enriching events with screenshots in our Screenshots documentation.

screenshotQuality

The quality of the attached screenshot. It can be set to full, high, medium or low.

attachViewHierarchy

Renders a JSON representation of the entire view hierarchy of the application when an error happens and includes it as an attachment. Learn more about enriching events with the view hierarchy in our View Hierarchy documentation.

idleTimeout

The idle time, measured in ms, to wait until a transaction will be automatically finished. The transaction will use the end timestamp of the last finished span as the endtime for the transaction.

The default is 3000.

sendClientReports

Set this boolean to false to disable sending of client reports. Client reports are a protocol feature that let clients send status reports about themselves to Sentry. They are currently mainly used to emit outcomes for events that were never sent.

(New in version 6.6.0)

captureFailedRequests

Once enabled, this feature automatically captures HTTP client errors, like bad response codes, as error events and reports them to Sentry.

(New in version 7.0.0)

Integration Configuration

For many platform SDKs integrations can be configured alongside it. On some platforms that happen as part of the init() call, in some others, different patterns apply.

integrations

In some SDKs, the integrations are configured through this parameter on library initialization. For more information, please see our documentation for a specific integration.

Hooks

These options can be used to hook the SDK in various ways to customize the reporting of events.

beforeSend

This function is called with an SDK-specific message or error event object, and can return a modified event object, or null to skip reporting the event. This can be used, for instance, for manual PII stripping before sending.

By the time beforeSend is executed, all scope data has already been applied to the event. Further modification of the scope won't have any effect.

beforeBreadcrumb

This function is called with an SDK-specific breadcrumb object before the breadcrumb is added to the scope. When nothing is returned from the function, the breadcrumb is dropped. To pass the breadcrumb through, return the first argument, which contains the breadcrumb object. The callback typically gets a second argument (called a "hint") which contains the original object from which the breadcrumb was created to further customize what the breadcrumb should look like.

Transport Options

Transports are used to send events to Sentry. Transports can be customized to some degree to better support highly specific deployments.

transport

Switches out the transport used to send events. How this works depends on the SDK. It can, for instance, be used to capture events for unit-testing or to send it through some more complex setup that requires proxy authentication.

Tracing Options

enableTracing

A boolean value, if true, transactions and trace data will be generated and captured. This will set the tracesSampleRate to the recommended default of 1.0 if tracesSampleRate is not defined. Note that tracesSampleRate and tracesSampler take precedence over this option.

tracesSampleRate

A number between 0 and 1, controlling the percentage chance a given transaction will be sent to Sentry. (0 represents 0% while 1 represents 100%.) Applies equally to all transactions created in the app. Either this or tracesSampler must be defined to enable tracing.

tracesSampler

A function responsible for determining the percentage chance a given transaction will be sent to Sentry. It will automatically be passed information about the transaction and the context in which it's being created, and must return a number between 0 (0% chance of being sent) and 1 (100% chance of being sent). Can also be used for filtering transactions, by returning 0 for those that are unwanted. Either this or tracesSampleRate must be defined to enable tracing.

tracePropagationTargets

An optional property that controls which downstream services receive tracing data, in the form of a sentry-trace and a baggage header attached to any outgoing HTTP requests.

The option may contain a list of strings or regex against which the URLs of outgoing requests are matched. If one of the entries in the list matches the URL of an outgoing request, trace data will be attached to that request. String entries do not have to be full matches, meaning the URL of a request is matched when it contains a string provided through the option.

If tracePropagationTargets is not provided, trace data is attached to every outgoing request from the instrumented client.

Experimental Features

experimental

An optional property that configures which features are in experimental mode. This property is either an Object Type with properties or a key/value TypedDict, depending the language. Experimental features are still in-progress and may have bugs. We recognize the irony.

Hybrid SDK Options

autoInitializeNativeSdk

Set this boolean to false to disable the auto initialization of the native layer SDK. Doing so means you will need to initialize the native SDK manually. Do not use this to disable the native layer.

You should follow the guide to native initialization if you chose to use this option.

enableNativeCrashHandling

Set this boolean to false to disable hard crash handling from the native layer. Doing so means that the SDK won't capture events for hard crashes on Android and iOS if the error was caused by native code.

enableAutoSessionTracking

Set this boolean to false to disable the release health feature.

sessionTrackingIntervalMillis

Set this to change the default interval to end a session (release health) if the app goes to the background. Default is 30,000.

enableNdkScopeSync

Set this boolean to false to disable the scope sync from Java to NDK on Android.

attachThreads

Set this boolean to true to automatically attach all threads to all logged events on Android.

enableAutoPerformanceTracing

Set this boolean to false to disable auto tracing tracking.

enableWatchdogTerminationTracking

Set this boolean to false to disable watchdog termination tracking on iOS.

enableScopeSync

Set this boolean to false to disable sync of Scope data to Android and iOS SDKs.

reportPackages

Set this boolean to false to disable reporting all the package dependencies.

anrEnabled

Set this boolean to true to enable ANR (Application Not Responding) detection on Android.

anrTimeoutInterval

Set this to change the default interval of the ANR detection. The default is 5 seconds.

reportSilentFlutterErrors

Set this boolean to true to enable reporting FlutterErrorDetails.silent errors automatically.

autoAppStart

Set this boolean to false to disable automatic app start tracking.

enableAutoNativeBreadcrumbs

Set this boolean to false to disable automatic breadcrumbs on the Native platforms.

enableUserInteractionBreadcrumbs

Set this boolean to false to disable automatic User Interactions breadcrumbs.

enableUserInteractionTracing

Set this boolean to false to disable automatic User Interactions tracing.

proguardUuid

Sets the Proguard UUID for Android platform